CO/Tech FIB75600v1-pt Скачать руководство пользователя страница 1

UITED KINGDOM

  internet www.clasohlson.co.uk

Ver

. 20220516

LED Grow Light

Art.no  36-8557 

Modell  FIB75600v1-pt

Please read the entire instruction manual before using the product and 
then save it for future reference. We reserve the right for any errors in text or 
images and any necessary changes made to technical data. In the event of 
technical problems or other queries, please contact our Customer Services.

Safety

 

Warning:

•  Do not use the light if it or its mains lead and plug are damaged in 

any way.

•  The light should only be connected to a wall outlet with a 230 V,  

50 Hz power supply.

•  Do not mount the light in an environment where it is exposed to 

water, moisture or extreme temperatures.

•  Never try to open the product, repair or modify it in any way.

 

Electric shock hazard

•  The bulb in this light fitting must only be replaced by a qualified 

electrician.

•  Installation and maintenance work on the product involves the risk 

of an electric shock.

•  If the mains lead is damaged it must be replaced by a cable of 

identical specifications as the original.

Connecting the lights using a connector

This product is intended for indoor use only.

Connecting several lights together

Up to 10 light fittings can be interconnected. There are two different 
ways of connecting the lights together:
1. The first is with a connector, which enables the lights to be joined 

end to end.

2. The second is using a series connection cable, which enables 

the lights to be joined about 10 cm apart (handy for corner mounting).

1. Push the supplied connector into 

the mains socket on the light fitting.

2. Connect the two lights together. Make sure that the connector is securely 

inserted and that both lights are securely connected to each other.

3. Repeat the same procedure if you wish to connect additional lights.

Connecting the lights using a connection cable

Installation

 

Warning:

Ensure that there are no electrical wires or water pipes in the ceiling or 
wall where you intend to drill/screw.
1. Mount the ceiling bracket using the screw. Use a masonry drill and 

wall plug to create an anchor hole if necessary.

• 

Plant illumination time: 

Most plants grow better when not exposed 

to 24-hour light, they also require a period of darkness.  
We recommend that the grow light is used with a timer.

 

Handy tip

•  It is a good idea to connect the light fitting/s to a wall socket which 

is controlled by an on/off switch.

Class II luminaire.

The light bulb is not dimmable.

Switch the light fitting on and off 
by pressing the power switch.

1. Use the supplied series connection cable to connect the first light to 

the second.

2. Repeat the same procedure if you wish to connect additional lights.

Care and maintenance

•  The light fitting should be cleaned using a dry cloth or vacuum cleaner.
•  Unplug the light fitting from the wall socket if the product is not be 

used for an extended period.

Instructions for use

 

Note

• 

Distance: 

The intensity of the light is inversely proportional to 

the square of the distance from the source, which means that if you 
double the distance between the light and an object, only a quarter 
of the light will reach the object. It is therefore important that 
the lights are as close as possible to the plants and equally spaced.

Troubleshooting guide

The light 
doesn’t 
come on.

•  Check that the light is turned on.
•  Make sure that the mains lead is undamaged and 

is securely connected to both the wall socket and 
the light.

•  Is the wall socket energised?
•  Check that any interconnected lights are intact and 

properly connected to each other.

Responsible disposal

This symbol indicates that this product should not be 
disposed of with general household waste. This applies 
throughout the entire EU. In order to prevent any harm to 
the environment or health hazards caused by incorrect waste 
disposal, the product must be handed in for recycling so that 
the material can be disposed of in a responsible manner. When 
recycling your product, take it to your local collection facility or contact 
the place of purchase. They will ensure that the product is disposed of 
in an environmentally sound manner.

Specifications

Rated voltage

 

220–240 V AC, 50/60 Hz

Mains lead 

1.8 m

Bulb 

LED

Photosynthetic photon flux 
 PPF 

17 μmol/s 

 

PPFD @20 cm

 

10 μmol/m²/s

Wavelength

 

Blue

  450 nm

 

Red

  660 nm

Series connection cable 

20 cm

Wattage 

8.5 W

IP rating 

IP20

Operating temperature

 

−30 ºC to +40 ºC

Dimensions 

600 × 24 × 35 mm

2. Press the light fitting into the brackets until it clicks into place.
3. Plug the mains lead into a wall socket.

Отзывы: