XNET Network Video Server User’s Guide
10 of 44
2.4. PC Requirements
AV streaming data received from XNET can be decoded or stored in a PC running XNET-NVR
program which is a viewing & recording program for a PC. Minimum requirement of the PC is
described below:
Minimum
Recommended
CPU
Pentium III 700
Pentium IV 1.2G above
Main Memory
128 MB
256MB above
Operating system
*
Windows 2,000 or later
Windows 2,000 or later
Web browser
Internet Explorer 5.0
Internet Explorer 5.0 above
Resolution
1,024 X 768
Higher than 1,024 X 768
Network
10 Base-T Ethernet
100 Base-T Ethernet
* Operating Systems supported : Windows 2000 Professional
Windows XP Professional / Windows XP Home Edition
2.5 Quick Installation Guide
Brief information for rapid installation is provided in this section. For more detailed information
you are recommended to refer to pertinent documentations provided with the product or refer
to cnbtec‟s home page
(http://www.cnbtec.com)
1.
Connect XNET to LAN by using one of the following method
1) If you have power adaptor with PoE, connect the network camera and PC as
illustrated in Figure 2.5. Both power and network connection is made with a single LAN
cable.
The propriety PoE (Power over Ethernet) adds convenience in installing the network
camera by providing both power and LAN connection using single LAN cabling.
2) If you have standard power connect the network camera and PC as illustrated in
Figure 2.6
.
Figure 2-5. Connecting Network camera and PC using PoE Adaptor
XNET
PoE
Injector
AC In
LAN Hub
Data + Power
CAT5 cable
