AN211
Rev 0.5 | 13/24
www.cmostek.com
2.2.4 Set Hardware Options
The specific steps are the same as in section 2.1.4.
ISP space setting
IAP space setting
Watchdog setting
IC option setting
Figure 16. Set Hardware Options
2.2.5 Download Code and Hardware Settings to Programmer
1) Click
Offline mode.
2) Set the maximum number of programming 0~65534). x. For example, if the
max counter
is set to 2000, the U1 tool will report
an error during programming after successfully programming 2000 chips. The value of 0 represents unrestricted programming
times. The maximum value of max counter is 65535.
3) Set the serial number (see Section 3 How to use the serial number for more details).
4) Click
Download
to download the code and hardware settings to the programmer
