CMOSTEK CMT2300A, Руководство пользователя

Страница: 4 / 46

CMT2300A
Rev 1.0 | Page4/46
www.cmostek.com
1. Electrical Characteristics
V
DD
= 3.3 V, T
OP
= 25 °C, F
RF
= 433.92 MHz, the sensitivity is measured by receiving a PN9 coded data and matching the
impedance to 50Ωunder the 0.1%BER standard.Unless otherwise stated, all results are tested on theCMT2300A-EM evaluation
board.
1.1 Recommended OperationCondition
Table 1. Recommended operation condition
Parameter Symbol Condition Min. Typ. Max. Unit
Power voltage V
DD
1.8 3.6 V
Operating temperature T
OP
-40 85
℃
Power voltage slope 1 mV/us
1.2 Absolute Maximum Rating
Table 2. Absolute Maximum Ratings
[1]
Parameter Symbol Conditions Min Max Unit
Supply Voltage V
DD
-0.3 3.6 V
Interface Voltage V
IN
-0.3 V
DD
+0.3 V
Junction Temperature T
J
-40 125 ℃
Storage Temperature T
STG
-50 150 ℃
Soldering Temperature T
SDR
Lasts at least 30 seconds 255 ℃
ESD Rating
[2]
Human Body Model (HBM) -2 2 kV
Latch-up Current @ 85
℃
-100 100 mA
Notes:
[1]. Stresses above those listed as “absolute maximum ratings” may cause permanent damage to the device. This is a stress
rating only and functional operation of the device under these conditions is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
[2].
Caution! ESD sensitive device. Precaution should be used when handling the device in order
to prevent permanent damage.