CMC OilQSens OQ 3000, Руководство пользователя

Страница: 20 / 36

cmc Instruments GmbH 20
version 3.6-05/18
7.4 RS232 INTERFACE
For connection to a PC / laptop, a 9-pin cable (9-pin D-SUB jack) is necessary.
Communication settings:
Baud rate:
9600 Baud
Parity Bits: none
Data Bits: 8
Stop Bits: 1
Flow control: no
7.5 INSTALLATION ON A NETWORK
Installation of OilQSens

in customer network
Depending on the selected mode, LAN or WLAN, it is pre-configured by the
manufacturer.
Installation with a fixed IP address
Prior to delivery the manufacturer assigns a free fixed IP address on its network.
OilQSens
®
then seeks this address.
Installation with DHCP
After connection to the network by the customer, OilQSens
®
is automatically assigned
a free IP address by the DHCP server on the router.
Registration on the website
Each OilQSens
®
has a unique serial number in a database.
Username, password and website access are sent separately from the manufacturer.
Press Enter to proceed to the sensor data. Fig. 7 shows the login page of the website.
Fig. 7: Login mask of the cmc Server.