11-2016
EST Ventless 3 Doors
Quick Setup Instructions
HOT WATER
INLET FOR
CONDENSER
WASH ONLY
DRAIN
CONDENSER
DRAIN
110V CONNECTOR
INSIDE CONTROL
BOX
BOOSTER HEATER
CONTACTOR
CONNECTION
COLD WATER
INLET
AUTO START
SWITCH
1
STEP
WALL
DRAIN
8"
FLOOR DRAIN
Connect a 2" drain pipe (not supplied) from scrap
accumulator to floor or wall drain.
Level dishmachine by adjusting leveling legs. Dishmachine
must be level front and back to ensure proper performance.
3
STEP
LEVELING LEGS
1
2
3
2
WARNING
: Electrical and plumbing
connections need to be made by a
licensed service person and comply
with all Federal, State and Local
Health, Electrical, Plumbing and
Safety codes.
EST-VENTLESS 3-DOOR
BACK VIEW
WARNING:
the CMA-Ventless has
a Heat Recovery (HR) system comprised
of heat exchange coils, that can become
restricted or clogged if the water supplied
to the machine contains lime scale, better
known as hard water conditions.The
cold water supplied to the CMA-Ventless
should be analyzed and treated, to
maintain a maximum of 3 grains water
hardness, to prevent scaled conditions.
One of the first signs of “hard water”
would be a restricted, or zero, water flow to
the wash arms.
Failure to provide soft water
(3g or less) will void the machine’s
warranty.
PN: 10130.25
Connect dishmachine to hot water source 120°F -
140°F. Connect cold water inlet (min 41°F and max
65°F).
2
STEP
COLD
WATER INLET
HOT
WATER INLET
