Club Car DS Villager 4, Руководство по техническому обслуживанию и ремонту

Страница: 377 / 510

GASOLINE VEHICLE - ELECTRICAL
COMPONENTS Starter/Generator
19
A
B B
A
1
1
1
1
A
1
A
2
1
1. Measure each position in two places, 90 degrees apart
496
Figure 19-10 Inspect Commutator
ARMATURE GROUND TEST
CAUTION
• Do not submerge armature in solvent.
NOTE: Before testing, wipe the armature with a clean cloth and remove carbon dust and metal particles from between
commutator bars.
Using a multimeter set on 200 ohms, place the positive (+) probe on the commutator bars and the negative (–) probe
on the armature core. The reading should be no continuity. If the reading is incorrect, replace the armature and the
two bearings
(Figure 19-11, Page 19-12) .
2020 Precedent,Villager 2 and 4 Maintenance and Service Manual Page 19-11