Club Car Carryall 500, Руководство по техническому обслуживанию и ремонту, Страница: 75 / 456

ACCELERATOR AND BRAKE PEDAL GROUP Pedal Group Adjustment – Electric Vehicles
5
accelerator pedal height closest to the floorboard. Press the accelerator pedal until the end of the tool rests
against the floorboard; pedal height should be 5-5/8 inches (14.3 cm). Use a rubber strap to hold pedal in
position against the floorboard and then tighten nut to 26 ft·lb (35.3 N·m)
(Figure 5-27, Page 5-19) .
1
2
1. 1/2-Inch Socket
2. 1/2-Inch Wrench
Figure 5-25 Brake Rod Adjustment Figure 5-26 Accelerator Pedal Height Adjustment
ST
OP
PARK
GO
GO
ST
OP
PARK
MICRO BR
EAK POINT
MICRO BR
EAK POINT
1
2
1. Accelerator Pedal Adjustment Tool (CC P/N 101871001)
2. Rubber Strap
Figure 5-27 Accelerator Pedal Height Adjustment
6. Adjust the brakes. See Brake Adjustment, Section 6, Page 6-6.
7. Connect the battery cables. See Connecting the Batteries – Electric Vehicles, Section 1, Page 1-4.
2017 Carryall 500 and 700 Maintenance and Service Manual Page 5-19