Club Cannon QUAD JET, Руководство пользователя

Страница: 11 / 20

Club Cannon products (the “Product”) are meant to be
used to create special effects. Any use of these Products
shall be in accordance with the Terms and Conditions
presented at the time of sale, and as they appear in this
manual. Any misuse or abuse of this Product can be
extremely dangerous.
DANGER
CO₂ SETUP
1
2
3
4A
4B
Note: After use, close the valve on the CO₂ tank. Clear the remaining gas through the
product, depleting all pressure in the system. Once the product is de-pressurized,
you can safely detach the hose from the tank and product.
1.
Attach the female quick connect fitting on the hose, to the male
quick connect fitting on the product. Pull back the sleeve and apply
slight force to mate the connectors.
2.
Place the plastic washer inside the fitting that connects to the tank,
then attach the fitting. Tighten with the supplied tool, or any adjustable
wrench (1 1/8”).
3.
Position your CO₂ tank in a nearby location. Make sure the tank is
stable, and won’t tip over. Tanks should be secured with ratcheting
straps or chain to ensure they are secure.
4.
After attaching and tightening all fittings, turn on your CO₂ tank and
check for any leaks. If a leak is present, cease use immediately and
contact Club Cannon. Trigger the unit each time you want to release
CO2.
FAILURE TO INSTALL WASHER WILL RESULT IN A LEAK
UNSTABLE TANKS CAN BE EXTREMELY DANGEROUS
THIS STEP MUST OCCUR BEFORE PRESSURIZING SYSTEM
Club Cannon, LLC accepts no responsibility or liability for damages or injuries
caused by misuse or abuse of the Product.
9