Club Cannon MICRO JET MKII, Руководство пользователя

Страница: 16 / 20

Display blank or odd charaters
• Reboot via power cycle.
• If issue persists, contact Club Cannon directly.
Unit resetting while triggering
• Make sure power supply is properly grounded.
• If no earth ground is present, cease use immediately.
Valves not opening reliably
• Ensure sufficient voltage & amperage is supplied to unit.
• Ensure tanks are not in direct sunlight, causing increased
pressure. Tanks should not exceed 80 degrees F to ensure
reliable operation.
Leak from barrel
• Cease use immediately if any leaks are present.
• Contact Club Cannon directly for repair instructions.
Leak from quick connect
• Cease use immediately if any leaks are present.
• Ensure no particles or contaminates are present inside the
female quick connector. Check for any damage to black O-ring.
Leak from tank connection
• Ensure a CO2 washer has been inserted into the brass CGA-
320 fitting prior to connecting to tank. Use included attachment
tool to securely fasten connection.
Fog appears thin
• Ensure CO2 tanks have necessary siphon tube installed.
• Standard CO2 tanks do not produce the desired effect.
• Check relative humidity. Low humidity will have a negative
affect on the fog appearance.
Unit does not power on
• Ensure correct voltage is being supplied to product.
• Supplying incorrect voltage will cause permanent damage.
• If issue persists, contact Club Cannon directly.
No user serviceable parts inside.
If your issue is not listed, or the suggested solution did not solve the issue, contact Club Cannon.
DEVICE TROUBLESHOOTING
ISSUE SOLUTION
14