DLM-1 Series Installation Guide V1.0
6
BLOCK DIAGRAM
1
2
3
MIC LIMITER
MIC GATE
LINE GATE
LINE LEVEL
120HZ HPF
MIC PRIORITY
AND MIX
LIMITER
ETHERNET
MIC LEVEL
MIC HPF ENABLE
MIC PRIORITY ENABLE
MAIN OUT
MICROPHONE
LINE IN
3.5MM JACK
RCA PHONO
XLR-F
LINK
LINK IN
INSTALLATION - CONNECTIONS
The DLM-1’s RJ45 connector is at the rear of the module; cable access is from the left-hand side. Insert the network cable’s
RJ45 plug, ensuring that it latches securely.
DLM1-b1c08e
MAC Address
This device requires power from a
Power over Ethernet (PoE) switch
or 802.3af compliant PoE injector.
Serial Number
Default Name
www.cloud.co.uk
SETTINGS
1: MIC INPUT FI
LTER
2:
FAC
TO
RY
(NVM)
3:
FAC
TO
RY
(BOOT)
ON
OFF
OFF
OFF
ON
ON
DE
FAU
LT
The other end of the network cable should be connected to the Dante network by plugging it into an Ethernet port on a
network switch convenient to the area. Standard Cat 5 cable may be used.
