DLM-1 Series Installation Guide V1.0
9
DLM1-b1c08e
MAC Address
This device requires power from a
Power over Ethernet (PoE) switch
or 802.3af compliant PoE injector.
Serial Number
Default Name
www.cloud.co.uk
DLM1-b1c08e
MAC Address
This device requires power from a
Power over Ethernet (PoE) switch
or 802.3af compliant PoE injector.
Serial Number
Default Name
www.cloud.co.uk
The Dante screengrab below shows two DLM-1s, with a CDI-CA4 card as the final audio destination. The output of the first
DLM-1 (idented
DLM-1-1
) is routed to the input of the second DLM-1 (idented
DLM-1-2
). The output of the second DLM-1
is then routed to Input 1 of the CDI-CA4 card.
This principle of “virtual daisy-chaining” may be continued for as many modules as needed. Note that only Channel 1 of each
DLM-1 is used in all cases.
