configure succeeds. If the antenna enable is not selected, when select the corresponding reader on the DEMO
main interface, will pop up dialogue box as shown in image 4-20.
Image 4-20 Antenna selection
4.5.6 Base band parameter configuration
Select "configuration" on the DEMO main interface --> "senior" --> "reader", then pop-up dialog box, as
shown in image 4-21.
Image 4-21 Base band parameter configuration
Changing the base band parameter configuration can change the actual effect of the read and write (can be
reasonably configured according to the application scenarios, but it needs to be operated under the guidance
of our engineers).
EPC base band rate provides five options: Tair=25us, FM0, LHF=40KHz, dense reading mode;
Tair=25us, Miller4, LHF=300KHz; fast reading mode; 255/OUTO.
Session four choices: 0; 1; 2; 3.