4. Operating Instruction
4.1 Introduction of Demo software
The demo software mainly carries on system control, communication mode selection, parameter setting
and searching, read and write tags and data presentation and so on.
Before using the demon software, please check if the connection of the reader hardware is completed,
mainly ensure the following tips:
1, If the reader and computer serial port (network or RS485) is connected correctly
2, If the antenna ports have been connected to the antenna (ANT, ANT1 2, ANT 3, ANT totally four ports)
3, If the reader and writer start up (hear "drop" buzzer sound).
4.2 Demo software application environment
The
software
environment
Windows 2000 Service Pack 3
、
Windows Server 2003
、
Windows XP Service Pack 2
、
Windows 7 system
The hardware environment
P4/1.7GHz above PC, 512M or more memory, 40GB hard drive
4.3 Demo software version
V1.0.1
4.4 Demo software installation
1. Copy the software to the PC, open the software installation package, double click “ setup” application, follow
the installation guide.
2. Click the next step, and select the installation path, click next, and the software will begin to install.
3. Click the "Install", and software installation progress takes about 1mins.
4. After the progress of the software is finished, click the "finish" button to complete the installation.