CL7206B2 user manual
40
reader will automatically save the tag’s data which are not uploaded. PC could operate the saved data
through setting
Obtain saved data or setting
clear saved data. As below image 4-28.
Image 4-28 tag buffer data operation
As under the breakpoint resume mode, PC will confirm to each tag data from reader, under mass
quantity of
tag data will reduce the communication efficiency, increase the system load, we suggest: When
start the breakpoint upload functions, according to your application, can set up suitable “tag filter
parameter”
“filter time” to reduce the extra data uploading.
4.5.12 Auto idle set up
Select "configuration" on the main interface > "RFID configuration" > "auto idle ", then pop-up
dialog box, as shown in image 4-29: