CL7206B2 user manual
24
address through select “settings”
> "senior" > “configuration”, set up the IP address in “Network port
settings” when “configuration” dialog pops up. See image 4-9
Note
: The IP address of the reader can’t be repeated. Use the Ping command to test whether the
network is connected on PC.
image 4-9 reader configuration
4.5.1.3 RS485 communication connection
Select the communication mode in the "connect to the reader" option "485 connection (serial
port)", "connect parameter" select "COM?" (select PC serial number), communication rate select
"115200", enter the RS485 address, then click OK, as shown in image 4-10.
Image 4-10 485 communication connection