Clockaudio CCRM 4000, Инструкция по установке и эксплуатации

Страница: 14 / 32

Page 8 of 25 V2.1 2021-01
3.2 Tri Element version of CCRM 4000
To prevent unnecessary damage to the system it’s vitally important to follow the instructions
below:
1.
The CCRM 4000 is supplied partially
disassembled and requires simple push to fit
reassembly. The adjacent image shows a fully
assembled unit.
2.
Remove the CCRM 4000 system from its
transportation box and remove the 2 foam end
caps. The transportation box and packing
should be stored as this is the best packaging
to use in the unlikely event of having to return
the system to your dealer.
3.
Cut the tape securing the large cardboard box
to the large black ceiling frame.
4.
Remove the small cardboard box located under
the CCRM 4000. This contains the PSU (Main
unit only).
5.
Now open the large cardboard box and remove
from the packaging the microphone and large
ceiling bezel with bezel clamp.
Ceiling bezel
with clamp
IR
Sensor
Microphone
Safety
cable kit
Top and lower
bezel with
magnet assembly
Remote