CLIVET WSH-XSC3, Инструкция по установке и эксплуатации

Страница: 44 / 64

8.10 Compressor supply line shut-off valve
A
A. Supply line shut-off valve
Do not remove the seal
Remove only if authorized by the manufacturer.
Please contact the maker for informations.
8.11 Copeland scroll compressor
Compressor may stop Pumping With Motor Running
Turn Off And Wait Until Cool
May need More Than 1 Hour To Reset
Advanced Scroll Temperature Protection
8.12 Insulations
Check the condition of the insulations: if necessary apply glue and and renew the seals.
8.13 System discharge
1. evacuate the system
2. evacuate the exchanger, use all the present taps
3. use compressed air to blow the exchanger
4. dry completely the exchanger by an hot air jet; for greater safety fill the exchanger with glycoled solution
5. protect the exchanger from the air
6. remove the drain plugs to the pumps
Any anti-freeze liquid contained in the system should not be discharged freely as it is a pollutant.
It must be collected and reused.
Before starting a washing the plant.
Example
•
emptying pump
B
44