Clipper Jumbo 1000 P13, Руководство по эксплуатации

Страница: 9 / 24

9
Cutting head (2)
Jig-welded steel console equipped with pivot bar fixed to frame upright and housed in heavy-duty
bearings. Console supports the electric motor, the belt drive with its guard and the blade shaft
assembly. Bearings are machined for perfect fit and alignment. Precision-machined blade shaft
held in ball bearings and is driven by three heavy-duty V-section drive belts. The blade shaft
assembly is completely enclosed in a cutting head console, accessible for inspection by way of a
removable plate. The removable blade flange is tightened by means of a hexagonal nut. The
spring-loaded cutting head ensures smooth lowering of the cutting head. A depth-locking device
fixed to cutting head and frame enables the operator to set the cutting head to desired or to
maximum cutting depth. The movement of the head is ensured by a handwheel (6).
Water cooling system (3)
The coolant system comprises:
•
A powerful mechanical water pump
•
Plastic suction pipe delivering the water from the water pan to the cutting head
•
A large capacity water pan (pan is galvanised) supplied with drain plug
•
A water-tap, fitted to the blade guard, permitting controlled water flow
•
Two water nozzles located on the blade guard ensure adequate flow of water to both sides of
the cutting blade
•
Water curtains, fixed to frame and blade guard to restrict water spray and to minimise water
loss
Attention: The water pump must never run without water.
Blade guard (4)
Jig-welded steel construction with 1000mm-diameter blade capacity, offers maximum operator
protection and increased visibility of the work piece. Incorporated in the blade guard is an outer
detachable metal cover, which permits easy access to shaft for inspection and blade replacement
when motor is switched off, while fully protecting the blade when in operation.
Cutting table (5)
Large, heavy-duty and galvanised table fitted with water flow-control vents. The table is equipped
with a backstop and with a guide-a-cut device.