Clipper C1316SM, Руководство пользователя

Страница: 26 / 50

26
D. Depth Control
The depth control (raising screw) consists of a threaded rod which feeds into
a brass nut. In order to keep the two parts working smoothly it is necessary
to keep the rod free from dirt and sludge as much as possible. Cleaning the
threaded rod with a rag after each use will prevent sludge from collecting in
the tube assembly and protect the threads. It is a good practice to keep the
raising screw threads lubricated, as the slurry generated during cutting will
cause premature thread wear.
The bearing used to support the raising screw should be checked after each
use to make sure it is turning freely and lubricated. If the bearing requires re
lubrication lithium base grease is recommended.
E. Transmission
Eaton Model 6 Hydrostatic Transmission:
1. Accurate fluid level readings can only be made when the fluid is cold.
2. If the natural color of the fluid has become black or milky, the transmission
has over heated or water containment has occurred. Drain and replace
the fluid, check the fan and accessory belts, clean the cooling fins, and
also check for any fluid leakage. Do not pressure wash the transmission.
3. Use only the proper viscosity and type of fluid. At normal operating
temperatures, the optimum viscosity range is between 80-180 SUS (16-40
CS) and it should never fall below 60 SUS (10 CS).
4. The fluid should be chemically stable, incorporating rust and oxidation
inhibitors.
Recommended Fluids For Eaton Model 6 Transmissions
1. Mobil Fluid 300
2. Texaco TL 2209
3. Dextron B (General Motors)
4. M2C-33F And M2B-41A (Ford Motor)
5. Hy-Tran (International Harvester)
6. 10W Straight Viscosity SE, CC, or CD Rated Engine Oil
* 7. 20W Straight Viscosity SE, CC, or CD Rated Engine Oil
8. 30W Straight Viscosity SE, CC, or CD Rated Engine Oil
* Factory Supplied Transmission Fluid
F. Self-Propelling System