Clippasafe 118/2 Скачать руководство пользователя страница 1

This safety barrier conforms to EN 1930:2011 when fitted according to these instructions between two clean, structurally sound surfaces.

This safety barrier is designed for children up to 24 months.

This safety barrier is for domestic use only.

Manual closure system. 

Suitable for fixing across door openings and at the top and bottom of stairways. 

Make sure that you use the correct type of fixings depending on the surface available: 

Self-adhesive pads for appropriate surfaces or 

wood screws for wooden surfaces, multiple usage dowels and screws for brick, concrete or cement surfaces, and metal screws for metal surfaces.

If the gate has been exposed to an accident, it must not be used again.

Do not allow older children to climb over this gate as this may pose a danger.

Only use original Clippasafe spare parts for this product.

Periodically check the security of the fixings and general condition of each part. Adjust as necessary referring to these instructions.

Please make sure that the barrier is properly closed after each use.

WARNING: Read these instructions before installation as incorrect installation can be dangerous.

WARNING: Incorrect fitting or positioning of this safety barrier can be dangerous.

WARNING: Do not use the safety barrier if any components are damaged or missing.

WARNING: The safety barrier must not be fitted across windows.

WARNING: Stop using the barrier if the child is capable of climbing over it.

Extendable, Dual Fix, Wooden Gate

IMPORTANT - READ AND FOLLOW THESE INSTRUCTIONS

CAREFULLY AND KEEP FOR FUTURE REFERENCE

WIDTH

HEIGHT

Adjustable from 68 to 102

 cm 

Top of gate to floor 72.5

 cm 

WARNING

 - INCORRECT FITTING OR POSITIONING 

OF THIS SAFETY BARRIER CAN BE DANGEROUS

Fixing surfaces must be suitable for the purpose 

and structurally sound.

Bottom of 

stairs

Top of 

stairs

LOCATION

      

CONTENTS

GATE

SPANNER x

1

HINGE BAR x

2

HINGE COVER x

2

HINGE x

2

SCREWS x4

SCREWS x4

10cm SPINDLE x

2

10cm

13cm SPINDLE x

2

13cm

NUT x

2

SINK NUT x

2

WALL CUP x4

SCREW & WALL PLUG x6

 

Содержание 118/2









Отзывы: