Clinton 1190NC, Руководство пользователя

Страница: 3 / 18

Access to “HIDDEN PARAMETER”
A) If the power is OFF, turn it ON (the display reads “ OPERAION MODE”)
B) Turn the power OFF (the display reads “good bye, see you” )
C) Hold down the “NU/ND”, and the “ARROW-RIGHT” buttons
D) Turn the power back ON before the display gets blank (very important!)
E) Held the buttons down until a string of stars is displayed.
F) Release the buttons and push the “SET” button before the stars disappear. The access
to the “HIDDEN PARAMETER” is enabled.
Power OFF will disable the access.
MASTER RESET
Caution: This procedure will overwrite the whole parameter set with the default settings!
A) If the power is OFF, turn it ON (the display reads “ OPERAION MODE”)
B) Turn the power OFF (the display reads “good bye, see you” )
C) Push and hold down the “NU/ND”, the “ARROW-RIGHT” and the “ARROW-UP”
buttons
D) Turn the power back ON before the display gets blank (very important!)
E) Held the buttons down until the displayed message alternates between:
“PUSH SET” and “FOR RESET”
F) Release the buttons and push the “SET” button within ten (10) cycles.
The display reads: “PROGRAMMING”
NOTE: if the “SET” button is not pushed within 10 cycles, the program goes to the main
menu without executing the MASTER RESET.
Access to the “HIDDEN PARAMETER” is enabled to make important settings such as
speeds and needle-positions.
--3--