1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near
water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation
openings. Install in accordance
with the manufacturer’s instruc-
tions.
8.
Do not install near any heat
sources such as radiators, heat
registers, stoves, or other appara-
tuses (including amplifiers) that
produce heat.
9.
Do not defeat the safety pur-
pose of the polarized or ground-
ing-type plug. A polarized plug has
two blades with one wider than
the other. A grounding type plug
has two blades and a third ground-
ing prong. The wide blade or the
third prong are provided for your
safety. If the provided plug does
not fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.
10.
Protect the power cord from
being walked on or pinched partic-
ularly at plugs, convenience recep-
tacles, and the point where they
exit from the apparatus.
11.
Only use attachments/accesso-
ries specified by the manufacturer.
12.
Use only with the cart, stand,
tripod, bracket, or table speci-
fied by the manufacturer, or sold
with the apparatus. When a cart
is used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
13.
Unplug this apparatus during
lightning storms or when unused
for long periods of time.
14.
Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the ap-
paratus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
INFORMATION:
This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
DISCLAIMER:
Clinton Electronics reserves the right to change the contents of this
manual without prior notice.
WARNING:
Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
CAUTION:
To prevent electric shock and risk of fire hazards:
u
Do NOT use power sources other than that specified.
u
Do NOT expose the inside of this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
In USA and Canada, Use Class 2 Power Supply Only
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of suf-
ficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
