CLIMTEC RD Series, Технический паспорт

Страница: 39 / 44

The passport is developed according to requirements of GOST 2.601 39
FUNCTION OF AIR HEATING IN MODEL RD-100 STANDARD IS NOT PROVIDED.
SWITCH TO ON the stationary control panel 2 press the bottom red button for a few seconds until
the unit starts up. The unit has 3 operating modes and 4 speeds.
In order to select the required mode, hold down the lower right button until the mode indicator
starts blinking and use the buttons (right / left) switch to the desired mode and wait for it to work.
Recuperator front panel Close Open
recuperation
mode
Mechanical flow shut-off system
25
%
50
%
75
%
100
%
air inflow
mode
air axhaust
mode
1. When the air handling unit is switched on for the first time, the operating mode is automatically set
to «recuperation» 100%. When repeated, the last mode is saved. To switch to another mode - one short
press «Mode», then use the buttons «Up / Down» to select «SUPPLY», «EXHAUST» or «recuperation».
In a stationary control, the required mode is selected only by the On button. / Off «. In this case, the
corresponding LED blinks for a few seconds in the selected mode (see Section “Modes and speed of
recuperators”).
2. The recuperation power is regulated by the «Up / Down» or «- / +» buttons, respectively.
3. The heating element can be turned on with the «Air heater» or «Heating element» button. When the
recuperator is turned off with the heating element turned on, the heating element is automatically
cooled by the fan for several minutes.
4. The air heating function in the «EXHAUST» mode does not work.
• The STANDARD air handling units have an automatic air flow shut-off valve.
• The valve opens automatically when the unit is turned on and automatically closes when it is turned
off.
• In the event of an emergency or unplanned power outage, the air flow shut-off valve does not
automatically close, it closes when the power is restored.
On/Off (press 3-6 sec.)
Switching modes
Activate mode selection
Recuperation mode selection buttons
mode
Power
Up/Down
Up
Down
Increase recuperation capacity
Decrease recuperation capacity
Air heater
Remote control Stationary
control
ATTENTION! DO NOT SWITCH THE SYSTEM WHEN THE AIRFLOW SHUTOFF VALUE IS CLOSED (BASE
MODIFICATION)
RECUPERATOR CONTROL INSTRUCTION