Climit 24 BF, Инструкция пользователя

Страница: 88 / 152

88
EN
– press the buttons > or < until the pressure value indicated in
the table appears on the pressure gauge
– once the value indicated in the table has been reached, press
the button s for approximately 2 seconds to confirm the value
which will then flash once.
– press and hold down the buttons o and s at the same time for
approximately 6 seconds until the water delivery temperature
appears on the display and the boiler shuts down/starts up.
– close the valves which were opened previously.
7.7 Gas conversion
OF-BF models can be converted from operation with G20 (metha-
ne) to operation with G30/G31 (LPG) by installing the "Nozzle kit
for G30/G31 (LPG) - code 5144722 (
24 OF
) - 5144716 (
24 BF
-
28 BF
- 5144725 (
38 BF
) to be ordered separately from the boiler.
m
CAUTION
The maintenance interventions described must ONLY be
carried out the professionally qualified personnel.
a
WARNING
Before carrying out any interventions described:
– set the main system switch to "OFF"
– close the gas valve
– make sure that no hot parts inside the appliance are
touched.
OFF
Fig. 53
7.7.1 Preliminary operations
To carry out the conversion:
– remove the screws (1), pull the front panel (2) forwards and re-
lease it from the top by lifting it
1
2
Fig. 54
24 OF
– remove the four screws (3) and remove the front panel (4) from
the combustion chamber working carefully so as not to damage
the gasket or the panel insulation
3 4
Fig. 55