56
4.2.8. Firmware
To update the firmware of the Base:
Step 1.
C
lick “
Firmware
”.
Step 2.
Select the firmware update speed from the drop down menu. The
shorter the time, the faster the update speed; however some
computer may not be able to support high update speed and doing so
may crash the computer. You may start by by selecting 5 milliseconds,
if the computer could not support this speed, change to 100
milliseconds.
Step 3.
Select the provided firmware in your computer. A small window will
pop-up with the message
“Read file ! OK!”. Click on the “
OK
” button
and the update process will start.
Total elapsed time will be displayed to show how long the updating
process has elapsed.
Step 3.
When updating process is completed, a message
“Firmware update
success!
” will be displayed in a pop-up window.
Step 4.
Click on
“
OK
” and the programming tool will read the settings of
Mobile Lite again.
<
<
W
W
A
A
R
R
N
N
I
I
N
N
G
G
>
>
During updating process, please DO NOT disconnect the Base from the
computer nor clicking on the
“
Close
” button of the programming tool.
