Climax Mobile Lite-R23, Руководство по установке, Страница: 21 / 46

4.1.4. Setting
The Setting tab allows you to program general configuration for Mobile Lite.
Click “Write” when you have completed all settings to confirm.

Guard Time:

When the Active Button on Mobile Lite is pressed, the device will
play voice prompt “Initiating Help” and enter guard time.

During guard time, the device will emit one beep every second. After
Guard Time expires, Mobile Lite will begin report.

Guard Time Fall Sensor:

The Guard Time for Fall Sensor’s fall detection function is set
separately from regular Guard Time.

After the Guard Time Fall Sensor expires, Mobile Lite will begin
report.

This function is only used when a fall is detected, if the Active Button
on Mobile Lite or the Active Button of the learnt-in Fall Sensor is
pressed to activate alarm, normal guard time is used instead.

Fall Sensor Sensitivity:

Select a preferred sensitivity level for the learned-in Fall Sensor FS-3.
(5 is the highest sensitivity level while 1 is the lowest sensitivity
level.)

After setting the sensitivity level from the Control Panel, please press
and hold the button on the fall sensor for 8 seconds to receive the
sensitivity level data from the Control Panel. (Refer to the Fall
Sensor FS-3 user manual to complete sensitivity setting.)

Speaker Volume Level
18