Climax Mobile Lite-R15 Slim, Руководство по установке, Страница: 41 / 62

38
6.2. Current Operation Condition
Mobile Lite uses its LED to remind the user of its Current Operation Condition.

LED indicators:
Case B
LED Behavior Indication
Green LED (Top LED) On Mobile Lite is being charged.
1 flash every 5 seconds Mobile Lite operating
normally
Red LED (Top LED) 1 Flash every 3 seconds Mobile Lite low on battery
Amber LED (Bottom LED) 1 Flash every 3 seconds Cellular Network fault
When Mobile Lite is being charged, the Red LED will not indicate the battery
status.
If Mobile Lite is activated while having a Cellular Network fault (Amber LED
flashes once every 3 seconds), it will emit 3 beeps as a local warning.
6.3. GPS/Wi-Fi Locate Function

Mobile Lite location info can be acquired in 3 ways.
1. Activate an alarm
When an alarm is activated, Mobile Lite will also report its location info
along with the alarm event. (For IP & SMS Reporting)
During two-way communication following a successful IP report,
Mobile Lite location info will be updated every minute, and reported via
the previously successful IP channel. (For Speech Reporting)
2. Auto Check-In Report
When the Mobile Lite makes the auto check-in report to CMS, its
location info will also be updated and sent with the report.
3. Send SMS command LOC
If the SMS Command LOC is correct and successfully received,
Mobile Lite will report location info to programmed report destination
and the sender of the SMS command according to command selection.
Refer to
8.1 SMS Remote Programming Commands Table for more
details.

For IP reporting, the Location coordinates will be included in SIA_CID and
XML event reports.

For SMS reporting, the location info is sent as a webpage link for Google
Map. Click the link to display the location.