Climax H&S BOILER GUN BG22, Руководство по эксплуатации, Страница: 22 / 94

Page 10 BG22 Boiler Gun Operating Manual
2.2 C
ONTROLS
Depending on the user’s requirements, the BG22 Boiler
Gun can be powered by either a pneumatic or electric
motor. The controls for each type of motor follow.
WARNING
Always stop the machine and disconnect
any power supply before making
adjustments to controls or machine
components. Failure to follow this safety
precaution may result in severe injury.
2.2.1 Pneumatic motor controls
The pneumatic motor used on the BG22 features a
throttle lever. The safety lock must be disengaged by
pressing and holding up while depressing the throttle
lever. The throttle lever actuates the motor; when
released, the motor will stop and the safety lock will re-
engage.
This is an on or off control only.
2.2.2 Electric motor controls
The electric motor controls are similar to a drill or drill
driver. The trigger is squeezed to actuate the motor,
when released the motor will stop.
This speed is controlled by how far the trigger is pulled
in or let out.
The electric motor also has a direction control, which in
this application is not used. The direction control should
always be set to forward.
2.2.3 Cordless electric motor controls
To actuate the motor on the cordless electric motor
slide the red button up. The motor will run until the
button is slid down into the off position.
There is no speed or direction controls on the cordless
electric motor.
F
IGURE
2-2. P
NEUMATIC MOTOR THROTTLE LEVER
F
IGURE
2-3. D
IRECTION AND TRIGGER CONTROLS