Climax FF5000, Руководство по эксплуатации

Страница: 13 / 102

P/N 36668, Rev. 4 Page 3
1.3 Safety precautions
Climax Portable Machining and Welding Systems leads the way in promoting the safe
use of portable machine tools. Safety is a joint effort. You, the machine operator, must do
your part by being aware of your work environment and closely following the operating
procedures and
safety precautions contained in this manual, as well as your employer’s
safety guidelines.
Observe the following safety precautions when operating or working around the machine.
Training
–
Before operating this or any machine tool, you should receive instruction from a
qualified trainer. Contact Climax for machine-specific training information.
Intended use
–
Use this machine in accordance with the instructions and precautions in
this manual. Do not use this machine for any purpose other than its intended use as
described in this manual.
Personal protective equipment
–
Always wear the appropriate personal protective gear
when operating this or any other machine tool. Eye and ear protection are required when
operating or working around the machine. Flame-resistant clothing with long sleeves and
legs is recommended when operating the machine, as hot flying chips from the workpiece
may burn or cut bare skin.
Work area
–
Keep the work area around the machine clear of clutter. Keep all cords and
hoses away from the work area when operating the machine.
Moving parts
–
Except for operating controls, avoid contact with moving parts by hands or
tools during machine operation. Secure hair, clothing, jewelry, and pocket items to
prevent them from becoming entangled in moving parts.
1.4 Risk assessment checklist
Use these checklists as part of your on-site risk assessment and include any additional
considerations that may pertain to your specific application.
T
ABLE
1. R
ISK ASSESSMENT CHECKLIST BEFORE SET
-
UP
Before Set-up

I took note of all the warning labels on the machine.

I removed or mitigated all identified risks (such as tripping, cutting, crushing,
entanglement, shearing, or falling objects).

I considered the need for personnel safety guarding and installed any necessary
guards.

I read the machine assembly instructions (Section 3.2).

I considered how this machine operates and the best placement for the controls,
cabling, and the operator.

I have evaluated and mitigated any other potential risks specific to my work area.
All manuals and user guides at all-guides.com