Clifford intelliGuard 750, Руководство по установке

Страница: 31 / 49

© 2004 directed electronics, inc.
31
silent mode
z The transmitter channel programmed into this feature will arm/disarm the
system, but the siren will not chirp.
remote valet
z The transmitter channel programmed into this feature will make the system
enter/exit valet mode.
remote start
z This feature is only available with IntelliStart connected.
z The transmitter channel programmed into this feature will activate or shut down
the Intellistart remote start system.
window control
z This feature is only available with SmartWindows connected.
z The transmitter channel programmed into this feature will activate the vent or roll
down feature of the SmartWindows system.
accessory c output
z The transmitter channel programmed into this feature will activate the accessory output.
clear all remotes
z
This feature will erase all remote codes from the system memory. This feature is
convenient for erasing any transmitters that have been lost, stolen, or incorrect-
ly programmed into the system.
z After entering this feature press any button on the transmitter; the siren will chirp
to indicate that all transmitters have been erased from memory.