background image

Standard Features of the Concept 4O 

(cont.)

High-Output Insignia Siren

 — A loud yet compact siren designed exclusively

by Clifford Electronics for far superior performance, features, reliability and
even aesthetics to all other manufacturer’s look-alike, sound-alike sirens.

Ultra-Reliability

 — Since sirens are installed in the engine compartment,

they’re continually exposed to an unforgiving environment of extreme
temperatures, vibrations, dirt, dust and water, which may cause the siren’s
electronics to fail. But the entire electronic circuitry of the Concept 40 siren
and all of its components have been designed into the underdash control unit.
Consequently, the electronic circuitry is sheltered from the harsh environment
and is no longer the weakest link of the system. In fact, the calculated mean
time between failure (MTBF) of the Concept Insignia Siren is 10 times better
than that of conventional sirens.

User-Selectable Siren Duration

— You may set the siren wail for your

choice of either 30 or 60 seconds.

Patented Automatic Noise Abatement

—Limit alarm sounding to five

siren duration cycles even if a door is left open in the wake of an intrusion to
ensures against battery drain or towing due to noise pollution. The system
then automatically resets and re-arms all other points.

Enhanced User-Selectable AutoArming™

— Automatically arms itself

“passively” if you forget. May qualify you for an insurance discount that
could pay for the system (consult your insurance company).

AutoArming Enable/Disable

— You may disable or re-enable AutoArming

with just a few flicks of a switch.

AutoArm & Lock™

— You may set the system to automatically lock the

doors every time the system AutoArms.

Visual Indication

— Two parking lights flashes signal that the 30-second

countdown to AutoArming has started.

15-Second Entry Delay

— If you ever temporarily lose the use of your

remote controls, an entry delay allows you to enter the vehicle and disarm the
system without sounding the siren.

Instant AutoArm Bypass

— Just a quick turn of the ignition switch will

bypass AutoArming for one cycle — perfect when fueling the vehicle.
AutoArming is automatically restored the next time you park.

Control Unit with 4 Channels

— For remote controlled system operation

and accessories.

7

Содержание Concept 40


























Отзывы: