Clifford 5806X, Руководство пользователя

Страница: 45 / 54

41
© 2016 Directed. All rights reserved.
• Turn Paging OFF: The remote will not wake up to check for mes-
sages with Paging off in the Setup Remote menu. Caution ! The
remote will not receive trigger messages from the system.
• Turn Beeps OFF: The Button beeps can be turned off in the Setup
Remote menu. The command beeps still play normally.
Battery Replacement
LE 2-way remote control
1.
Unscrew
the hardware on unit rear and
remove
from housing.
Pry open the housing, this releases all parts of the assembly.
2. Gently
slide
out the used battery to remove it from the holding
clip.
Orient
the new battery for the correct polarity and
insert
into holding clip.
3.
Reassemble
unit and
secure
with hardware.
1-way remote control
1. If present,
remove
the small screw on the back of the remote.
2. Use a small flat blade screwdriver and
insert
it into the slot lo-
cated along the bottom of the remote, near the key ring. Care-
fully
pry
open the case.
3. Gently
slide
out the used battery to remove it from the holding
clip. Orient the new battery for the correct polarity and insert
into holding clip.
4.
Reposition
case parts, and
snap
together by pressing firmly and
evenly on the front and back. Reinstall screw (if applicable).
Battery Disposal
Directed cares about the environment. If you need to dis-
pose of the battery, please do so in accordance with your
municipal requirements for battery disposal.