Clifford 4806X, Руководство пользователя

Страница: 26 / 43

23 © 2013 Directed. All rights reserved.
3.
Turn
the key to off, and
remove
it from the ignition, the engine
continues running for the programmed runtime.
4.
Exit
the vehicle and lock the system.
Note
For Pit Stop on manual transmission vehicles follow the di-
rections in the
Manual Transmission Start (MTS mode) sec-
tion with the door open.
Manual Transmission Start (MTS mode)
When installed into a manual transmission vehicle, the system requires
that the MTS mode is properly set when parking. If MTS mode is not
properly set or is defeated after being properly set the system will not
start the engine.
1. With the engine running, press the foot brake then
set
the parking
brake and leave the engine running.
For Pit Stop or Turbo Timer mode (to leave the engine running
after locking),
open
the driver door.
2.
Release
the foot brake. As long as the engine is running there is
no time limit to perform this step.
3. Within 20 seconds of foot brake release,
press
any command
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command.
4. The parking lights flash 5 times to confirm MTS mode is enabled
and the remote start activates the ignition outputs.
5.
Turn
Off and
remove
the key from the ignition switch, the engine
remains running.
6.
Exit
the vehicle,
close
all the doors and lock the system.
7. The engine turns off. If the door is opened in Step 1 then the
engine continues to run.