Clevo W970LUQ, Руководство по обслуживанию

Страница: 35 / 94

Disassembly
Removing the 2nd (7mm) HDD from the Caddy Bay 2 - 11
2.Disassembly
Removing the 2nd (7mm) HDD from the Caddy Bay
1. Turn off the computer, turn it over to remove the battery ( page 2 - 5 ), bottom cover ( page 2 - 6 ) and ODD ( page 2
- 9 ).
2. Carefully pull the caddy bay out of the bay at point ( Figure 7a ).
3. Remove screws - from the bottom of the caddy bay ( Figure 7b ).
4. Slide the 2nd (7mm) hard disk in the direction of arrow ( Figure 7c ).
5. Lift the 2nd (7mm) hard disk out of the bay ( Figure 7d
)
.
6. Reverse the process to install a new 7mm HDD.
1
2
3 6
7
8

1. Caddy Bay
8. 2nd (7mm) HDD
• 4 Screws
a.
b.
1
5
c. d.
2
4
6
3
7
8

Note that the caddy bay only
supports 7.0mm (H) hard
disks.
Figure 7
2nd (7mm) HDD
Removal
a. Pull out the caddy bay.
b. Remove the screws.
c. Slide the 7mm HDD out
of the bay.
d. Lift the 7mm HDD out of
the bay.