Clevo W270BUQ Series, Руководство по обслуживанию, Страница: 34 / 76

Disassembly
Removing the Wireless LAN Module 2 - 11
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, turn it over, and remove the battery ( page 2 - 5 ) and the component bay cover ( page 2 - 9 ).
2. The Wireless LAN module will be visible at point on the mainboard ( Figure 11a ).
3. Carefully disconnect the cable , and then remove the screw ( Figure 11b ) .
4. The Wireless LAN module ( Figure 11c ) will pop-up, and you can remove it from the computer ( Figure 11d ).
Figure 7
Wireless LAN
Module Removal
a. Locate the WLAN.
b. Disconnect the cable
and remove the screw.
c. The WLAN module will
pop up.
d. Remove the Wireless
LAN module.
Note: Make sure you
reconnect the antenna
cable to the “1 + 2”
socket (
Figure 11b ).
1
2 3
4
b.
c.
a.
2
3
d.
4
4
1

4.Wireless LAN Module
• 1 Screw