Disassembly
Removing the System Memory (RAM) 2 - 9
2.Disassembly
Removing the System Memory (RAM)
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
DDRIII (DDR3) Up to 1066/1333 MHz. The main memory can be expanded up to 8GB. The SO-DIMM modules sup-
ported are 1024MB and 2048MB
DDRIII
Modules. The total memory size is automatically detected by the POST rou-
tine once you turn on your computer.
Memory Upgrade Process
1.
Turn
off
the computer, turn it over and remove the battery (
).
2.
Remove screws
-
from the component bay cover (
Figure 5a
).
3.
Carefully (
a fan and cable are attached to the under side of the cover
) lift up the bay cover.
4.
Carefully disconnect the fan cable
, and remove the cover
(note that you need to raise the bottom cover up to
an angle of around 30° angle).
5.
The RAM modules will be visible at point
on the mainboard (
Figure 5b
).
Figure 5
RAM Module
Removal
a. Remove the screws.
b. The RAM modules will
be visible at point
on the mainboard.
7
6. Component Bay Cov-
er
•
4 Screws
1
4
5
6
7
a.
1
2
3
4
6
30
ﾟ
5
7
6
b.
Содержание W270BUQ Series
