Clevo PD70PNN, Руководство по обслуживанию

Страница: 31 / 138

Disassembly
Removing the Keyboard 2 - 7
2.Disassembly
Removing the Keyboard
Keyboard Removal Procedure
1. Turn off the computer, remove the battery ( page 2 - 5 ).
2. The keyboard adhesive mylar will be visible at point on the computer. Pull the adhesive mylar out to release
the keyboard ( Figure 3 a ).
3. Open it up with the LCD on a flat surface before pressing at point to release the keyboard module (use the spe-
cial eject stick to do this) while releasing the keyboard in the direction of the arrow as shown ( Figure 3 b ).
1 2
3
4 5
a.
3
4
5
b.
1
2
2

4. Eject Stick
Figure 3
Keyboard Removal
a. Remove the adhesive
mylar from the keyboard.
b. Use a special eject stick
to push the keyboard out
while releasing the key-
board as shown.