manualshive.com logo in svg

Clevo P870KM, Руководство пользователя, Страница: 153 / 330

Поделиться
Скачать
Clevo P870KM Скачать руководство пользователя страница 153

Modules

Setting Up SATA RAID, Optane™ or AHCI Mode 6 - 5

6

RAID Setup Procedure

The actual procedure for setting up a RAID system will depend on whether or not
your system has UEFI enabled or not, and if you are using 2 * PCIE SSDs with the

Windows 10 OS

 installed on one of them. 

See below and follow the procedure that corresponds to your system setup:

•

“RAID Setup - UEFI Enabled” on page 6 - 6

•

“RAID Setup (2 * PCIE SSDs) - UEFI Enabled” on page 6 - 11

•

“RAID Setup - UEFI Disabled” on page 6 - 17

No matter which system setup you use make sure you install the 

Intel Rapid Stor-

age Technology driver

 - see 

“IRST Driver Installation” on page 6 - 55

).

Run the 

Intel® Rapid Storage Technology application

 to manage your RAID vol-

ume as instructed in 

“Intel® Rapid Storage Technology for RAID Systems” on

page 6 - 56

. 

See also 

“Deleting a RAID (Windows 10)” on page 6 - 21

 (however 

backup up any

necessary files and data before deleting a RAID

, as doing so will result in the loss

of all data on the RAID volumes).

Adding M2. 2280 

SSDs as RAID - Op-

erting System Note

When you want to add 2
* M.2 2280 SSD cards
configured as RAID 1 or
RAID 0, and you want to
install an OS on one of
them, make sure that
you 

clean any existing

OS off any SATA Disk/
SSD with an installed
OS

.

Failure to clean the ex-
isting OS off any SSD/
SATA Disk will result in

the system being un-
able to find the RAID
driver

.

Содержание P870KM











































































































































































































































































































































Отзывы:

Нет отзывов