Clevo N750BU, Руководство по обслуживанию

Страница: 30 / 96

Disassembly
2 - 6 Removing the Keyboard
2.Disassembly
Removing the Keyboard
1. Turn off the computer, turn it over to remove the battery ( page 2 - 5 ).
2. Remove screws - from the bottom case ( Figure 2a ).
3. Open it up with the LCD on a flat surface before pressing at point to release the keyboard module while releas-
ing the keyboard in the direction of the arrow as shown ( Figure 2c ).
4. Carefully lift the keyboard up, being careful not to bend the keyboard ribbon cable . Disconnect the key-
board ribbon cable from the locking collar socket ( Figure 2d ).
5. Carefully lift up the keyboard off the computer ( Figure 2e ).
6. Reverse the process to install the keyboard (do not forget to replace all the screws).
1 2
3
4
5 6
7
5
b.
c. a.
7
1
5
6
7
5
2
4
3
d.
6
7

5. Keyboard
• 2 Screws
Figure 2
Keyboard Removal
a. Remove the screws.
b. Release the keyboard by
pressing at point .
c. Disconnect the keyboard
ribbon cable from the
locking collar socket.
d. Remove the keyboard.
3