Clevo N250WU, Руководство по обслуживанию

Страница: 30 / 94

Disassembly
2 - 6 Removing the Hard Disk Drive
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7.0mm
(h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User’s Manual ) when setting up a new hard disk.
Hard Disk Upgrade Process
Figure 2
HDD Assembly
Removal
a. Remove the screws.
b. Remove the bottom
cover.
c. Locate the HDD assem-
bly.

HDD System Warning
New HDD’s are blank.
Before you begin make
sure:
You have backed up
any data you want to
keep from your old
HDD.
You have all the CD-
ROMs and FDDs re-
quired to install your op-
erating system and
programs.
If you have access to
the internet, download
the latest application
and hardware driver up-
dates for the operating
system you plan to in-
stall. Copy these to a re-
movable medium.
1. Turn off the computer, turn it over to remove the battery ( page 2 - 5 ).
2. Remove the SD card cover and screws - ( Figure 2a ).
3. Lift the bottom cover up from point ( Figure 2b ).
4. The hard disk drive will be visible at point ( Figure 2c )
.
1 2 16
17 18
19
a. b.

1. SD Card Cover
17. Bottom Cover
• 15 Screws
10
18
11
14
2
3 4 5
9
7
8
19
17
c.
12
1
6
13
15
16

Screw Size
Note that the size of
screw
is M2 x 5L. 9