Clevo N170RD1, Руководство по обслуживанию

Страница: 35 / 122

Disassembly
Removing the 2nd Hard Disk from Caddy Bay 2 - 11
2.Disassembly
Removing the 2nd Hard Disk from Caddy Bay
Figure 7
2nd HDD Removal
a. Push the caddy bay out
off the computer.
b. Remove the screws.
c. Lift the hard disk assem-
bly out of the caddy bay
d. Separate the hard disk
and connector.
1. Turn off the computer, remove the battery ( page 2 - 5 ), and bottom case ( page 2 - 8 ).
2. Carefully push out the caddy bay out in the direction of the arrow ( Figure 7a
)
.
3. Remove screws - (will depends on the HDD type) from the bottom of the caddy bay.
4. Remove screws - to release the hard disk assembly ( Figure 7b
)
.
5. Lift the hard disk assembly out of the caddy bay ( Figure 7c ).
6. Separate the hard disk and connector board ( Figure 7d ).
7. Reverse the process to install a new hard disk.
8. Restart the computer to allow it to automatically detect the new device.
6
1
2
3 4
5 6
7 8
9 10

1. Dummy Bay
7. HDD Assembly
9. Hard Disk
10. Connector Board
• 4 Screws
2
1
a.
d.
9
b.
c.
6
5
3
4
8
7
10