Clevo M670SRU, Руководство по обслуживанию

Страница: 36 / 93

Disassembly
2 - 12 Removing the Wireless LAN Module
2.Disassembly
Removing the Wireless LAN Module
1. Turn off the computer, remove the battery ( page 2 - 5 ) and the module bay cover ( page 2 - 8 )
.
1. The Wireless LAN module will be visible at point on the mainboard.
2. Carefully disconnect cable , then remove the screws - from the module socket.
3. The wireless LAN module will pop-up.
4. Lift the wireless LAN module
(
Figure d
)
up and off the computer.
Figure 8
Wireless LAN
Module Removal
a. Remove the cover and
Iocate the heat sink.
b. Disconnect the cable
and remove the 2
screws.
c. The WLAN module will
pop up.
d. Remove the WLAN
module.
Note: Make sure you
reconnect the antenna
cable to the “Main”
socket (
Figure b ).
1
2
3 4
5
1
2
4
c.
a.
5
3
b.
d.
5
5. WLAN Module
• 2 Screws