Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: [email protected]
GAS KETTLES
MODELS
:
c
KGL-40-T
c
KGL-80-T
c
KGL-60-T
Cleveland Standard Features
n
High efficiency Power Burner Heating System (62% to
65% efficiency)
n
Fast Heat-up and Recovery Time, 140M BTU’s on 40 gallon
models, 190M BTU’s on 60 gallon and larger
n
Insulated Heat Exchanger
n
Automatic Ignition System
n
Steam Jacket permanently filled with treated, distilled water.
Venting and/or refilling not required.
n
Solid State Controls, for Temperature and Low Water Safety,
in a plug-in Control Module
n
Control Panel includes:
n
Precise, consistent temperature control: less than
n
± 1°C variance (ideal for simmering).
n
L.E.D. Indicators for Heat Cycle and Low Water Warning.
n
Power “on/off” Switch
n
Front mounted combination Pressure/Vacuum Gauge
n
Type 304 Stainless Steel with #4 finish on kettle and supports
n
Tilt Mechanism of roller bearings and case hardened
self-locking worm and segment gear
n
Support Legs with level adjustable feet, flanged for floor bolting
n
50 psi Steam Jacket Rating and Safety Valve
n
Standard voltage is 115 volts, 60 Hz, single-phase,
supplied with cord and plug
n
Standard for natural gas operation
n
Typical approvals include AGA, CSA, CE, NSF and ASME
Options & Accessories
p
Type 316 Stainless Steel Kettle Liner for high acid food
products (316)
p
Pan Carrier (PCK)
p
Flow Diverter (FD)
p
Food Strainer (FS)
p
Kettle Markings (KM)
p
Cooking Baskets and Tri-Basket Supports (BS and TBS)
p
Drain Strainers (DS-)
p
Faucet Mounting Bracket (FBKT)
p
2˝ or 3" diameter Tangent Draw-Off Valve with Drain Strainer
(TD2 or TD3*), *TD3 for 60 and 80 gallon only and will raise
height of kettle by 5-5/8" (143mm)
p
3" diameter Butterfly Valve (BV3)
Shall be CLEVELAND, Gas-Fired Tilting Kettle, Model KGL- _____ T;
_____ gallons, 2⁄3 Steam Jacketed, Power Burner Heating System,
Insulated Heat Exchanger, 50 psi Steam Jacket Rating. Infinite
Variable Temperature Control, L.E.D. indicators for Heat Cycle and
Low Water Warning, Automatic Ignition System.
p
Spring-assisted, hinged, rotatable, domed Stainless
Steel Cover (CHS-)
p
Hot and Cold Water Faucet with Swing Spout (DPK)
p
Kettle Accessory Kit (KAK) includes:
p
Clean-up Brush(CB)
p
36
”
Kettle Paddle (KP)
p
36
”
Kettle Whip(KW)
p
36
”
Kettle Brush (KB)
p
Draw-off Brush (DB)
p
24 oz. Ladle (KL)
p
Automatic Water Meter (GMF or LMF)
p
Measuring Strip (MS)
p
Option for Propane Gas operation
p
Correctional Package
p
Heat Deflector Shield (HS001)
Short Form Specifications
Shown with optional Spring Assisted
Cover and 2" Tangent Draw-Off Valve
LEG TYPE, GAS-FIRED KETTLES
TILTING, 2⁄3 STEAM JACKETED
“SPLASH PROOF SERIES”
40, 60, or 80 GALLONS (150, 225, or 300 LITERS)
SECT.
IX
PAGE
7
0707
