CLEOPATRA Complete Wellness, Руководство пользователя

Страница: 27 / 38

27
By pressing the Hydro icon on the Cleo Touch, water beams come from the jets that are placed in
the bath. Then, by pressing Plus or Min, you can control the massage power of the water jets. This
system has 2 Massage Power Regulators (MKR) with which you can control the massage power of
both groups of back jets steplessly and independently of each other by turning the MKR. Even if
you have put the hydro system on full force by pressing the Plus, you can reduce the massage
power of the back jet groups. If you touch the Interval icon after touching the Hydro icon, the
system will automatically vary the massage power of the water jets. So before you press the Plus,
Min or Interval icon, always press the Hydro icon first. With this key you also turn off the system.
You can only turn on the spa system or just the hydro system or both. If you use the massage power
regulator (MKR) to allow water from the bottom and the hydro system is at full power and the spa
system is on full power then you have a powerful massage from the bottom.
4.3 Extreme Wellness Back
The combination of the spa and hydro system which also
allows water massage from the bottom.
The back massage system consists of 2 groups of jets
(small and large water jets). Pressing the Spa icon on the
Cleo Touch creates large air bubbles from the bottom.
You can then adjust the air quantity from the bottom jets
by pressing the Plus or Min icon. If you press the Interval
icon after pressing the Spa icon, the system
automatically varies the air quantity. So before you press
the Plus, Min or Interval icon, always press the Spa icon
first. With this key you also turn off the system. After the
bath is empty, the spa system starts up automatically
after about 20 minutes to empty the air lines.
MKR
5.1 Functioning
For optimal functioning, the bath must be filled with
water to just below the overflow. You can not turn on
the whirlpool if the bath is not filled with water.
With the Push & Drop control you turn the system on /
off. After about 20 minutes, the whirlpool will
automatically switch off.
With the O2 system, by pressing the control a water
flow with thousands of air bubbles is pumped into the
bath. The water turns from clear to white. Your skin is
thoroughly cleaned.
hydro
spa
interval
licht
5 O2 wellness whirlpool system