10
P2332BA | 2019-08
Apex Tool Group
4
EN
4
Before initial operation
4.1 Components required by the
customer
4.2 Adjusting inserts before installation
Adjust the inserts for the application concerned. To change
inserts, remove the O-rings.
Fig. 4-1: Inserts
4.3 Charge battery pack
The battery pack is only partly charged upon delivery.
Fully charge the battery before using it for the first time.
See battery pack instruction manual
P1970E.
4.4 Installation
Use only the four holes in the housing for installation, see
pos. 16, page 7. Do not make any additional holes in the
housing as the resulting swarf is could constitute a risk of
shorting.
Component
Phillips screwdriver (PH3)
Hexagon key, 2.5 mm