36
P2544PM | 2021-02
Apex Tool Group
3
EN
3.9
WLAN-Communications
In this menu, information about the WLAN connection is to be found. To configure WLAN settings, use the
Cordless RF Configuration
software. See Document P2372JH.
If the tool is programmed so that WLAN settings are assigned via DHCP, this will appear to the right near
the "-" symbol as long as no connection could be established.
Fig. 3-32: Menu – Communications
Symbol
Description
Activating/deactivating WLAN connection.
SSID display.
IP address display.
If the IP address is assigned twice, the symbol
is displayed in the run screen.
Then change the IP address.
Network mask display.
Gateway display.
MAC address display.
Signal strength in [dBm] display.
Region display.
NM
GW
MAC
