32
P2544PM | 2021-02
Apex Tool Group
3
EN
3.8.3
Torque test
With the torque test, the functionality of the measuring sensor can be checked and the torque measurement
can be evaluated. At the beginning of the test, the torque is 0 Nm. Throughout the entire test, the torque is
measured and displayed.
To start the tests, keep the Start switch pressed.
>
Fig. 3-26: Submenu – Torque test
3.8.4
Calibration value
>
Fig. 3-27: Submenu – Calibration value
Symbol
Description
Display of the current torque.
Display of the maximum torque.
0.13
Nm
0.08
Nm
Symbol
Description
Display of the neutral position value for the measuring sensor.
The displayed value should be at 0 V. The tolerance limits are
±
0.2 V.
0.06
