Apex Tool Group
P2544PM | 2021-02
23
3
EN
3.7.1
Setting the date and time
The date and time can only be changed in the FastApps mode. In the mPro mode, this menu is only used as
a display.
>
Fig. 3-13: Submenu – Setting the date and time
To change the date or time:
1. Press the
button to activate the imput fields. Each digit can be changed individually.
→
The value is highlighted in red and an arrow is displayed below the first digit. This digit can be
changed.
2. Use the
and
buttons to increase/decrease the numbers.
3. Confirm with the
button and aktivate the next digit.
4. Repeat the procedure with each digit to change the time and date one by one.
5. Nach dem letzten Zeichen die Eingabe mit der
-Taste speichern.
After the last digit confirm the input wit the
button to save the input.
3.7.2
Adjusting the screen brightness
>
Fig. 3-14: Submenu – Screen brightness
Button
Description
Time display
Presentation:
Hour: Minute
Display of the date
Presentation:
Day.Month.Year
17/08/20
9:15
