Apex Tool Group GmbH
P2398PM | 2018-12
43
Menus and Functions
3
EN
3.11.2
Saving an archive
The measurement results in the archive data can only be saved in the FastApps mode. In the mPro mode,
no archive data are recorded on the tool.
>
>
Abb. 3-34: Submenu – Saving an archive
To save the archive:
1. Connect the USB stick with the tool via the Micro B USB cable.
2. Navigate to
Saving an archive
:
>
>
3.
must be pressed to start the saving process.
→ The progress bar and status bar indicate when the archive is saved.
→ A
.csv
file is generated.
The .
csv
file contains a table with the following columns:
Button
Description
Start the saving process.
Display of the saving progress.
The status bar indicates what percentage of the archive is already saved.
Display of the status of the saved archive.
After saving, the status bar is red or green:
•
Green: The saving process has been successfully completed. There is an "OK" in
the status line.
•
Red: An error occurred during the saving process. See Error messages, software
updates and data storage, Seite 52.
Column
Description
Record No.
Sequential number of archive entries/results
Date
Date
Time
Time
App
Number of the Linking group (FastApp)
Step
Number of the linking/batch display
Tq
Torque
TqMin
Low Torque
TqMax
MaxTorque
0%
0
